DriveRack 220i

System Processor with AFS™ Advanced Feedback Suppression

MSRP $787.44
Buy It Now
220ifront lg full width
  • 220ifront lg tiny square
  • 220irear lg tiny square
Larger Images

Overview

Designed from the ground up to provide state-of-the-art signal processing, the DriveRack 220i is the perfect tool for any fixed-install application. With a full complement of processing features and Mic/Line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations.

The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.

Features

  • Advanced Feedback Suppression (AFS)
  • Graphic and Parametric EQ
  • Compressor
  • Limiter
  • Auto Gain Control
  • Noise Gating
  • De-Esser
  • Ducker
  • Bandpass Filters
  • 2x2 Matrix Mixer
  • 1.3 Seconds of Delay
  • RS-232 PC GUI control
  • Mic/Line Inputs
  • Wall Panel Control
  • Security Lockout

Manuals/Documentation

Downloads

Specifications

Input (2) Switchable line or mic inputs
Input Connectors Female XLR line inputs and Euroblock
Input Type Electronically balanced/RF filtered
Input Impedance >50k ohm
Max Input +20dBu
CMRR > 40dB, typically >55db @ 1kHz
Mic Preamp gain 30 to 60dB
Mic Preamp Equivalent Input Noise (EIN) < -110dB, 22Hz-22kHz, 150 ohm
Mic Preamp Phantom Power +15VDC
Output 2 total
Output Connectors Male XLR and Euroblock
Output Type Electronically balanced, RF filtered
Output Impedance 120ohm balanced, 60ohm unbalanced
Max Output +20dBu
A/D Converter dbx Type IV™ Conversion System
A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted
Type IV Dynamic Range >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW
Sample Rate 48kHz
D/A Dynamic Range 112 dB A-weighted, 109dB unweighted
Dynamic Range >110 dB A-weighted, >107dB unweighted
THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain
Frequency Response 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk >110dB, 120dB typical, (input-to-output: >780dB)
Operating Voltage 100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
Dimensions 19” Wide, 1.75”High, 7.7” Deep
Safety Agency Certifications UL 6500, IEC 60065, EN 55013, E 60065

Support/FAQs

DriveRack 220i FAQs

Which serial adapters work with the DriveRack 200i?

Please refer to the following: RS-232Adaptors.pdf

DriveRack 220i

System Processor with AFS™ Advanced Feedback Suppression


MSRP
$787.44

Click a retailer logo below to buy online:

Also available from worldwide distributors.

×