| 麦克风前置放大器连接器 |
XLR Floating balanced, Pin 2 Hot |
| 麦克风前置放大器输入的阻抗 |
1.75kΩ |
| 麦克风前置放大器增益 |
+10dB to +60dB |
| 麦克风前置放大器幻象电源 |
+48 V |
| 共模 |
>40dB, typically 55dB |
| 麦克风前置放大器的最大输入的电平 |
0.2Vrms |
| 输入接口 |
(line) Floating balanced, TIP Hot |
输入阻抗 |
(line) 30kΩ unbalanced, 60kΩ balanced |
最大输入 |
(line) >+21dBu, balanced or unbalanced |
| 输入增益范围 |
(line) -20dB to +30 dB |
| 插入连接器 |
1/4" TRS: Normalled; tip is Send, ring is Return |
| 插入阻抗 |
>5kΩ (ring-return); 100Ω (tip-send) |
| 插入最大级别 |
>+21dBu |
| 插入噪音 |
<-84dBu, unweighted (20Hz-20kHz) |
| 插入失真 |
<0.01% THD, 20Hz-20kHz, +10dBu |
| 输出连接器 |
1/4" Balanced/Unbalanced TRS Connectors |
输出阻抗
|
100Ω unbalanced, 200Ω balanced |
最大输出 |
>+21dBu, >+20dBm (600Ω load) |
| 增益调整范围 |
-30dB to +10dB |
| 噪音 |
<-80dBu (typically -85dBu, unweighted (20Hz-20kHz) |
频率响应 |
20Hz to 20kHz, +0.5, -0.5dB |
总谐波失真 |
<0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFF |
| 压缩机的阈值范围 |
-40dBu to +20dBu |
| 压缩机阈值特性 |
OverEasy® |
| 压缩机比率 |
>4:1 For input levels beyond 20dB above threshold |
| 最大压缩 |
30dB |
| 压缩器启动时间 |
Program-dependent; adjustable |
| 压缩器释放时间 |
Program-dependent; adjustable |
| 压缩机失真 |
Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0 |
| 嘶声消除器特征 |
Wideband Gain Reduction |
| 嘶声消除器频率范围 |
800Hz to 10kHz High Pass |
| 嘶声消除器释放时间 |
12dB/octave Program-Dependent; approximately 1mS/dB |
| 增强剂 HF 详细特性 |
Program-controlled shelving equalizer, approximately 15dB maximum HF boost |
| 增强剂如果细节特征 |
Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1 |
| 膨胀机/门的阈值范围 |
OFF to +15dBu |
| 膨胀机/门比率 |
Adjustable 1.5:1 to 10:1 |
| 膨胀机/门最大深度 |
>50dB |
| 膨胀机/门攻击时间 |
Program-Dependent, approximately 2mS |
| 膨胀机/门发布时间 |
Program-Dependent, approxiamtely 10mS/dB |
| 膨胀机/门动态范围 |
Typically 105dB |
功耗 |
15W |
| 工作电压 |
DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz |
| 工作温度 |
0°C to 45°C (32°F to 113°F) |
尺寸 |
1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm) |
单位重量 |
4.68 lbs/2.13 Kgs |
运输重量 |
6.54 lbs/2.97 Kgs |
更新: 2026年4月
也可從