Mikrofonförförstärkare
hem > produkter > Mikrofonförförstärkare

Mikrofonförförstärkare

Mikrofonförförstärkarna som utvecklats av dbx är så allmänt använda och respekterade av ljudtekniker att namnet på en av våra mest populära förförstärkare – 286 – har blivit en universellt använd term för ”mikrofonförförstärkare”. Våra mikrofonförförstärkare sätter standarden inom broadcast- och studiovärlden genom att ge ljudtekniker all den signalbehandling de behöver för sina mikrofoner.

Mikrofonförförstärkare Produkter

  • 286s

    286s

    Mikrofonförförstärkare Processor
    Gain 0 to +60dB
    Input Z ~4.2kΩ
    Phantom Power +48V
    CMRR >40dB
  • Premium
    676

    676

    Mikrofonförförstärkare för rörbaserat mikrofonsteg
    Type Tube Preamp
    Input Z 1.9kΩ
    CMRR >85dB
    Inst. Input 1/4" TS
  • 580

    580

    Mic Preamp - 500 Series
    Format 500 Series
    Type Mic Preamp
    Input Z 1.7kΩ
    Max Gain 60dB

  Välj 2 till 6 produkter att jämföra

 

Tech Tip

Tame pesky plosives

The "P" sound is one of the toughest things to record cleanly. Pop filters help, but if you don't have one on hand — or it's just not cutting it — grab a drum stick, a wooden spoon handle, or a long screwdriver and hold it upright between your mouth and the microphone. It slices through those plosive bursts of air before they hit the capsule, greatly reducing the pop while keeping your tone and volume intact.

Two lanes compared. Without a stick, the burst of air from a P sound travels straight into the microphone capsule and pops. With a slim upright object held between mouth and microphone, the air splits around it while the voice passes through to the capsule.
The stick is too narrow to block the voice, but wide enough to break up the column of air a plosive throws at the capsule.