1066
生産終了

コンプレッサー / リミッター / ゲート

1066
拡大画像

世界で最も有名なコンプレッサーシリーズを製造した後、当社の評判に値する新しいコンプレッサーを製造するという課題は、ほとんどのエンジニアにとって難しいものです。しかし dbx® は違います。当社のエンジニアは世界中の誰よりもオーディオを知っています。今、彼らの才能の成果が 1066 ステレオ コンプレッサー/リミッター/ゲートの形であなたのものになります。

クラシックな dbx レスポンスをミックスに素早く追加したいですか?「Auto」ボタンをタッチするだけで実現します。または、独立した Attack および Release コントロールを使用して、1066 を特定のニーズに合わせてカスタマイズできます。信号パス内の不要な周波数またはマイクブリード?Side Chain External ボタン(SC Ext)で周波数依存ゲインコントロールの設定と実行が簡単です。Side Chain Monitor ボタン(SC Mon)とお気に入りの EQ を使用して、デバイスをトリガーする特定の周波数を調整します。当社の標準として、コンター スイッチにより、低周波がミックス全体に穴を開けるのを防ぎながら、ソフト圧縮でミックス全体を簡単に滑らかにできます。選択可能な入出力メーターにより、すべてがレベル的にマッチしていることを確認でき、信号対ノイズ比を最大化します。

全体的なスピーカー保護のため、新しい PeakStopPlus™ は以前のすべての回路を上回る性能を発揮します。新しい設計により、PeakStopPlus は不要なトランジェントがドライバーを損傷するのを防ぎながら、多くの他の「ハード」リミッターに共通する歪みを最小化します。選択可能な Hard-Knee または OverEasy® 特性により、1066 は「ヘビー」なほぼスペシャルエフェクト圧縮から滑らかでソフトなゲインレベリングまで、ゲインコントロールのニーズに最適です。新しいライトパイプテクノロジーは、ほとんどの他のユニットに搭載されている標準的な LED に代わるもので、1066 を読みやすく、操作も簡単にしています。

スタジオ、放送局、または P.A. システムでの使用を問わず、1066 は非常にシンプルな操作を実現するように設計されています。1066 を使用することで、不要な信号を排除し、全体的な信号ゲインを柔軟に制御し、デュアルモノまたはステレオ操作でミックス全体を保護できます。

1066 の中核は、新しい dbx V2 VCA です。1066、1046、およびその後に登場する 10 シリーズ製品のために特別に開発されたこの革新的な VCA は、非常に低い歪みとほぼ計測不可能なノイズ特性を維持しながら、優れたダイナミックレンジ特性を備えています。結論は以下の通りです。ワールドクラスの設計と組み合わせて動作する新しい VCA により、dbx 1066 は数百ドル以上高い価格のコンプレッサーよりも優れたパフォーマンスを発揮します。

最新のテクノロジー VCA、細心なコンポーネント選別、および厳密なテスト手順は、新しい dbx 1066 が系統立てられた dbx シグナルプロセッサーの長い系譜における最新製品である理由のほんの一部です。

推奨用途: Portable, Tour, Studio.

特長

  • 選択可能なオート(クラシック dbx®)またはマニュアル(可変アタックおよびリリース)コンプレッション
  • コンツアスイッチがディテクタ回路から不要な低周波情報を除去
  • 選択可能な Overeasy® またはハードニーコンプレッションモード
  • PeakStopPlus™ リミッティングで最大許容レベルを最小限の歪みで設定
  • SC Ext および SC Mon でゲーティング機能用の外部デバイスの設定と監視
  • 真の差動バランス型金メッキ XLR および 1/4" 入出力
  • 真の RMS レベル検出
  • 入力レベル、出力レベル、およびゲインリダクションの精密計測
  • 真のステレオまたはデュアルモノ動作
  • チャンネルごとの切り替え可能な +4dBu または -10dBV 動作

ダウンロード

ドキュメント
  言語 サイズ アップロード日
file type icon 1066 CAD 図面(前面)
en 更新: 2026年4月
en  487KB 2026年4月
file type icon 1066 CAD 図面(背面)
en 更新: 2026年4月
en  1.33MB 2026年4月
file type icon 1066 カットシート-英語
en 更新: 2026年4月
en  767KB 2026年4月
file type icon 1066 取扱説明書-英語
en 更新: 2026年4月
en  832KB 2026年4月
file type icon 1066 Owner's Manual-Multilingual
更新: 2026年4月
  1.05MB 2026年4月

上記のリンクをクリックしてブラウザで文字化けが発生する場合は、ファイルを右クリックしてコンピューターに保存してください。

仕様

Input Connectors XLR and 1/4" TRS (Pin 2 and tip hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced > 50 kOhm, unbalanced >25 kOhm
Max Input > +24 dBu balanced or unbalanced
CMRR Typically >50 dB at 1 kHz
Output Connectors XLR and 1/4" TRS (Pin 2 and tip hot)
Output Type Servo-balanced/unbalanced, RF filtered
Output Impedance Balanced 120 Ohm, unbalanced 60 Ohm
Max Output > +21 dBm balanced, > +20 dBm unbalanced
Sidechain Input Connector 1/4" Unbalanced (Tip-Sleeve)
Sidechain Input Type Unbalanced, RF filtered
Sidechain Impedance >10 kOhm
Sidechain Max Input Level >+24 dBu
Sidechain Output Connector 1/4" Balanced TRS (tip hot)
Sidechain Output Type Impedance balanced, RF filtered
Sidechain Output Impedance Balanced 2 kOhm, unbalanced 1 kOhm
Sidechain Max Output Level >+21 dBu balanced or unbalanced
Bandwidth 20 Hz to 20 kHz, +0/0.5 dB
Frequency Response 0.35 Hz to 90 kHz, +0/-3 dB
Noise < -95 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range > 118dB, unweighted
THD+Noise 0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz
IMD < 0.1% SMPTE
Interchannel Crosstalk < -80 dB 20Hz to 20 kHz
Stereo Coupling True RMS Power Summing
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Ratio 1:1 to infinity:1
Compressor Threshold Characteristic Selectable OverEasy® or hard knee
Compressor Attack/Release Characteristic AutoDynamic™
Compressor Attack/Release Modes Selectable Manual or Auto
Compressor Manual Attack Time Scalable program-dependent
Compressor Manual Release Time Scalable program-dependent
Compressor Auto Attack Time Program-dependent
Compressor Auto Release Time Program-dependent
Compressor Output Gain -20 to +20 dB
Limiter Threshold Range +4 dBu to +24 dBu (off)
Limiter Ratio infinity:1
Limiter Type PeakStopPlus® two-stage limiter
Limiter Stage 1 PeakStop® brickwall limiter
Limiter Stage 1 Attack Time Zero
Limiter Stage 1 Release Time Zero
Limiter Stage 2 Predictive intelligent program limiter
Limiter Stage 2 Attack Time Program-dependent
Limiter Stage 2 Release Time Program-dependent
Expander/Gate Threshold Range Off to +15dBu
Expander/Gate Ratio 1:1 to 30:1
Expander/Gate Attack Time < 100 µsec
Expander/Gate Release Time Program-dependent
SC Ext. Switch Routes the external sidechain input signal to the detector
SC Mon. Switch Routes the sidechain signal to the output, interrupting the normal audio
OverEasy® Switch Activates the OverEasy compression function
Countour Switch Activates the frequency-dependent detector function
Auto Switch Activates automatic program-dependent attack and release times, disabling the manual Attack and Release controls
I/O Meter Switch Switches between monitoring input and output levels on the Input/Output Level meter
Bypass Switch Activates the direct input-to-output hard-wire relay bypass. Relay automatically hard-wire bypasses unit at power-down and provides a power-on delay of 1.5 sec.
Operating Level Switch (rear panel) Switches the nominal operating level between -10 dBV and +4 dBu simultaneoulsy for both input and output levels
ST Link Switch Link both channels for stereo operation. Channel One becomes the master
Gain Reduction Meter 12-segment LED bar graph at 1, 2, 4, 6, 9, 12, 15, 18, 21, 24, 27 and 30 dB
I/O Meter 8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
Compressor Threshold Meter 3-segment LED bar graph at Below (-), OverEasy and Above (+)
Expander/Gate Threshold Meter 2-segment LED bar graph at Below (-) and Above (+)
Limiter Threshold Meter 1 LED to indicate PeakStopPlus™ limiting
Function Switches LED indicator for each front-panel switch
Output Transformer Options Jensen® JT-123-dbx or JT-11-dbx, BCI RE-123-dbx or RE-11-dbx
Operating Voltage 100-120 VAC 50/60 Hz 200-240 VAC 50/60 Hz
Power Consumption 20 Watts
Fuse 100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Power Connector IEC receptacle
Dimensions 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Unit Weight 5.1 lbs. (2.3 kg)
Shipping Weight 7.5 lbs. (3.4 kg)

ニュース

サポート/FAQ

1066 よくある質問

コンプレッサーのコントロールについて詳しく学び、設定例を見るにはどこへ行ったらよいですか?

お客様のご使用製品の取扱説明書をご一読ください。ほとんどの製品には設定例と各種コントロールの説明が含まれています。詳細情報および設定例については、 Compression 101 White Paperをご参照ください。