DriveRack PA+

Loudspeaker Management System

MSRP $749.95
Buy It Now
Pa  front lg full width
  • Pa  front lg tiny square
  • Pa  rear lg tiny square
Larger Images

Overview

The best just got even better! The DriveRack PA, far and away the world's most popular loud speaker management system has now become the DriveRack PA+; the best has indeed gotten better. Showcasing all the features that users around the world have come to expect, including easy setup, rock-solid reliability and unparalleled sound quality, this version of DriveRack has gone to great lengths to earn its "plus." With more settings, more control and enhanced circuitry, the sound you seek is right at your fingertips.

Although the DriveRack PA+ is loaded with functions and features, it is easy to set-up and use. The dbx exclusive Set Up Wizards walk you through system set up with easy to follow step-by-step instructions. Just pick your speakers and amps from the built-in list on the PA+ and then let the Auto Level Wizard™ fine tune the level settings of each speaker. You can then let the Auto EQ® Wizard help you further optimize your sound. Finish up by using the AFS Wizard, which automatically sets filters to eliminate any feedback during performances. Within minutes, your system will sound like it was tuned by a pro! No experience required. Get the most out of your PA with the DriveRack PA+, the worldwide standard in loudspeaker management.

Features

  • Setup Wizard Steps Through Speaker and Amp Selection and Levels
  • Auto EQ™ Wizard with 28-Band RTA Tunes Your System For The Venue
  • AFS™ Wizard Helps Eliminate Feedback
  • Stereo Feedback Elimination with 12 feedback notch filters
  • dbx 120A Sub-harmonic Synthesizer
  • Classic dbx Input Compression
  • JBL® Speaker and Crown® Power Amp Tunings included
  • Full time RTA function
  • Front-Panel Output Mutes
  • Pink Noise Generator (used with Auto EQ and Auto Level Wizards)
  • Linked Stereo DSP Processing for ease of use
  • 24-Bit ADC/24-Bit DAC, >113 dB Dynamic Range
  • 2-Channel XLR Input and 6-Channel XLR Output
  • 2x3, 2x4, 2x5, 2x6 Crossover Configurations
  • Dual 28-band Graphic EQ- Linked or Dual Mono
  • Stereo Multi-band Parametric EQ
  • Stereo Output Limiters
  • Output Alignment Delay
  • Power on/off Mute Circuitry
  • Front-panel RTA-M XLR input with phantom power
  • 25 User Programs/25 Factory Programs
  • Full Graphic LCD Display
  • Front Panel Input and Output Meters

Manuals/Documentation

Downloads

Specifications

Input (2) line inputs. (1) RTA Mic input
Input Connectors (2) Female XLR line inputs. XLR RTA Mic input
Input Type Electronically balanced/RF filtered
Input Impedance >40k ohm
Max Input >+20dBu
CMRR > 45dB
Mic Preamp Phantom Power +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN) < -117dB, 22Hz-22kHz, 150 ohm (RTA)
Output (6) Line Outputs
Output Connectors Male XLR
Output Type Electronically balanced, RF filtered
Output Impedance 120ohm
Max Output +20dBu
Alignment Delay 10ms per channel (60ms total)
A/D Converter dbx Type IV™ Conversion System
A/D Dynamic Range 110 dB A-weighted, >107 dB weighted
Type IV Dynamic Range 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW
Sample Rate 48kHz
D/A Dynamic Range 112 dB A-weighted, 110dB unweighted
Dynamic Range >110 dB A-weighted, >107dB unweighted
THD+Noise 0.004% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage 100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
Power Consumption 25 W
Unit Weight 5.5 lbs. (2.5 kg)
Shipping Weight 7 lbs. (3.18 kg)
Dimensions 1.75" (4.4cm) H x 5.75"(14.6cm) D x 19" (48.26cm) W

News

Support/FAQs

DriveRack PA+

Loudspeaker Management System


MSRP
$749.95

Click a retailer logo below to buy online:

Also available from worldwide distributors.

×