676

Προενισχυτής μικροφώνου με λυχνίες – κανάλι επεξεργασίας (channel strip)

Μεγαλύτερες εικόνες

Η Κληρονομιά του Επαγγελματικού Ήχου.

Στην dbx Professional Products είμαστε περήφανοι που παρουσιάζουμε το εντελώς νέο channel strip 676 Tube Mic Pre. Το 676 αντιπροσωπεύει το καλύτερο της τεχνογνωσίας της dbx στην επεξεργασία δυναμικής, με πάνω από 40 χρόνια εμπειρίας.

Το 676 διαθέτει ένα άψογο τμήμα προενισχυτή με λυχνίες, υψηλής τάσης, Class-A, που λειτουργεί στα 250 V, ώστε το σήμα σας να μπορεί να είναι όσο κρυστάλλινο ή "βρώμικο" (με χαρακτήρα και παραμόρφωση) χρειάζεστε. Το 676 ενσωματώνει επίσης το σχέδιο συμπιεστή/περιοριστή από το πολυζήτητο dbx162SL, καθώς και έναν παραμετρικό ισοσταθμιστή (EQ) 3 ζωνών με μεσαίες συχνότητες με δυνατότητα συνεχούς ρύθμισης (sweepable).

Το 676 παρέχει στους επαγγελματίες του ήχου το τέλειο channel strip τόσο για εφαρμογές ηχογράφησης όσο και για ζωντανές εμφανίσεις, με τη στρατιωτικών προδιαγραφών κατασκευή, τα χειριστήρια εμπνευσμένα από vintage σχεδίαση και τους μετρητές VU.

Συνιστάται για: Στούντιο.

Χαρακτηριστικά

  • Προενισχυτής με λυχνία κενού Class A και υψηλό κέρδος τάσης
  • Μετρητής VU vintage υψηλής ευκρίνειας
  • Συμπιεστής βασισμένος στον σχεδιασμό του dbx162SL
  • Ημιπαραμετρικός EQ 3 ζωνών
  • Είσοδοι και Έξοδοι 1/4" και XLR
  • Είσοδος Οργάνου στο Μπροστινό Πάνελ
  • Insert Side Chain

Βίντεο

 

 

 

 

 

 

Λήψεις

Έγγραφα Ασφαλείας
  Γλώσσα Μέγεθος Ανέβηκε
file type icon 676 Έγγραφο ασφαλείας και συμμόρφωσης-Αγγλικά
en ενημέρωση: Απρ 2026
en  300 KB Απρ 2026
Έγγραφα
  Γλώσσα Μέγεθος Ανέβηκε
file type icon 676 Εγχειρίδιο χρήσης-Αγγλικά
en ενημέρωση: Απρ 2026
en  7 MB Απρ 2026
file type icon 676 Οδηγός γρήγορης εκκίνησης-Αγγλικά
en ενημέρωση: Απρ 2026
en  1 MB Απρ 2026
file type icon 676 Φυλλάδιο-Αγγλικά
en ενημέρωση: Απρ 2026
en  6 MB Απρ 2026

Εάν κάποιος από τους παραπάνω συνδέσμους έχει ως αποτέλεσμα παράξενους χαρακτήρες στο πρόγραμμα περιήγησής σας, κάντε δεξί κλικ στο αρχείο για να το αποθηκεύσετε στον υπολογιστή σας.

Προδιαγραφές

Mic Preamp Connector Female XLR Pin 2 Hot; Electronically balanced/unbalanced
Mic Preamp Input Impedance 1.9 kΩ
CMRR >85 dB from 20 Hz to 3 kHz, >70 dB from 3 kHz to 20 kHz
Instrument Input Connector Tip-Sleeve ¼” Jack
Input Type (instrument) Unbalanced
Instrument Input Impedance 500 k Ω
Max Input (instrument) +21dBu unbalanced
Preamp Insert Connector Tip-Ring-Sleeve ¼”, RF filtered
Preamp Insert Type Unbalanced, Tip = send, Ring = return
Line Outputs (Preamp & Compressor/Limiter) Connector Male XLR and Tip-Ring-Sleeve ¼” (Pin 2 and Tip hot)
Line Outputs (Preamp & Compressor/Limiter) Type Servo-balanced/unbalanced
Line Outputs (Preamp & Compressor/Limiter) Impedance Balanced 30 Ω, unbalanced 15 Ω
Line Outputs (Preamp & Compressor/Limiter) Maximum Output Level > +21 dBm (into a 600 ohm load)
Compressor Sidechain Insert Connector Tip-Ring-Sleeve ¼”, RF filtered
Compressor Sidechain Insert Type Unbalanced, Ring = output, Tip = input
Compressor Sidechain Insert Impedance 1 kΩ (output), 50 kΩ (input)
Vacuum Tube Type 12AU7A / ECC82
Vacuum Tube Grid Power Supply +250V DC
Vacuum Tube Heater Power Supply +12V DC
Frequency Response (Mic Input) 20 Hz to 50 kHz, +0/-1dB, 40 dB gain
Frequency Response (Instrument Input) 30 Hz to 70 kHz, +0/-1dB, unity gain
THD + Noise (Mic In to LIne Out) 0.25% typical at 0 dBu out, 1 kHz, 40 dB gain
THD + Noise (Instrument In to Line Out) 0.2% typical at 0 dBu out, 1kHz, unity gain
Equivalent Noise Level Typically > -123 dBu with a 150 Ω source load, 22 Hz to 22 kHz
Noise Floor Mic Insert to Comp Output: <-93 dBu, unity gain, EQ flat and no gain reduction
Preamp Function Switches/Controls: Instrument Input Selects between microphone XLR input and front panel ¼” instrument input
Preamp Function Switches/Controls: +48V Sends +48 VDC through 6.81 kΩ resistors to pins 2 and 3 of the microphone input
Preamp Function Switches/Controls: 20dB Pad Attenuates the microphone input by 20 dB
Preamp Function Switches/Controls: Polarity Invert Reverses pins 2 and 3 of the microphone input XLR
Preamp Function Switches/Controls: 80 Hz Low Cut Enables an 80 Hz, 12 dB/octave high pass filter in the microphone and instrument signal path
Preamp Function Switches/Controls: Gain Control Range -∞ to +55 dB for Microphone Input; -∞ to +40 dB for Instrument Input
Preamp Function Switches/Controls: Post Tube Attenuation -∞ to 0 dB
Preamp Function Switches/Controls: Peak Indicator Illuminates RED when the Preamp is within 3 dB of clipping
EQ Low Frequency 100 Hz, Low-pass shelving filter
EQ High Frequency 10 kHz, High-pass shelving filter
EQ Mid Frequency Sweepable from 100 Hz to 8 kHz
EQ Function Switches/Controls: Narrow Selects the “Q” of the MID Frequency EQ. “OUT” position Q = 0.9; “IN” position Q = 2.9
EQ Gain (All Bands) Sweepable from –15 to +15 dB
Compressor Threshold Range -40 dBu to +20 dBu
Compressor Threshold Characteristic Selectable OverEasy™ or Hard Knee
Compressor Ratio Variable 1:1 to ∞:1; 60 dB maximum Compression
Compressor Attack/Release Modes Selectable Manual or Auto
Compressor Manual Attack Time Scalable program-dependent; Typically 400 dB/msec to 1 dB/msec
Compressor Manual Release Time Scalable program-dependent; Typically 4000 dB/sec to 10 dB/sec
Compressor Auto Attack Time Program-dependent, typically 15 ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB
Compressor Auto Release Time Program-dependent, typically 120 dB/sec
Compressor Output Level Control Range -20 dB to +20 dB
Compressor Peak Indicator Illuminates RED when the Compressor/Limiter is within 3 dB of clipping
Limiter Type dbx PeakPlus™
Limiter Threshold Range -4 dBu to + 22 dBu (off)
Limiter Ratio ∞:1
Limiter Attack and Release Program-dependent
Power Supply Universal switch-mode
Operating Voltage 100 – 240 VAC, 50/60 Hz
Power Requirements 20 Watts
Fuse T2.5AL 250V
Turn-On Time Approximately 2 seconds
Dimensions 3.5”H X 19”W X 8”D (88.9mmH X 482.6mmW X 203.2mmD)
Weight 8.1 lbs (3.7 kg)
Shipping Weight 11.0 lbs (5.0 kg)

Ειδήσεις

Υποστήριξη/FAQ